Best 1911 Magazines

7
SHARES
1.6k
VIEWS

The 1911 may be the most famous pistol in the world. Originally developed by legendary gunsmith John Browning, the patent has long since expired. As a result, most pistol manufacturers make their own versions of the gun. These include Remington, Smith & Wesson, Glock, and others. The US military used it until the 1990s, and it’s still the standard sidearm for many police and military organizations worldwide.

As you might expect, this popularity means that there’s no shortage of magazines for this long-serving pistol. And we’ve set out to find the best 1911 magazines on the market.

We’ve chosen ten of the most popular magazines online, and taken a close look at all of them. We’ll go over their features, as well as the pros and cons of each model. After that, we’ll talk about some things you’ll need to know before you buy one.

While the 1911 is available in several calibers, the standard configuration accepts .45 ACP cartridges. For the most part, we’ll be focusing on those.

Best 1911 Magazines Available Online

Wilson Combat’s 8-Round .45 ACP Magazine is engineered from aircraft-grade stainless steel. It’s built to match tolerances, a full 50 percent tighter than the specifications for the original 1911 government. It has a 5/8 inch pad on the bottom, which is perfectly sized for 1911s with magazine wells. It slides in smoothly, and locks securely.

The spring is very strong, so strong that it can take some force to load the last cartridge. Because it’s so powerful and the follower action is so smooth, this magazine will never cause a jam, barring catastrophic failure. It’s made in the USA.

This magazine will fit almost any 1911 .45 ACP model, but may require some modification. Some models with shallower magazine wells – such as the Springfield Range Officer and Springfield Commander – will require you to shave off part of the upper base pad in order to get them to seat properly.

Pros:

  • Aircraft-grade stainless steel construction
  • 5/8” pad for 1911s with flared mag wells
  • Strong spring and smooth follower action
  • Made in the USA

Cons:

  • May require modification
  • Takes some force to load

Why it’s recommended: If you have a government model 1911 or equivalent, this magazine is perfect for any use. Target shooting, home defense, it does it all.

The Wilson Combat Vickers Duty Magazine is the ultimate in quality. It’s also the most expensive magazine on our list, but in this case you get what you pay for. In addition to being made from aircraft-grade steel, this magazine has observation slots in the back instead of on the side. This increases structural integrity, while still allowing you to see how many rounds you have left.

The steel follower is very smooth, with a strong enough spring to fully feed the cartridge even on a marginal pistol. It’s safe to say this magazine will never cause a jam. The Vickers is made in the USA, and is available in two calibers: standard .45 ACP and .9mm Luger. It has a base pad for comfort, and for easy removal from pistols with mag wells.

Pros:

  • Aircraft-grade stainless steel tube
  • Rear observation slots
  • Available in .45 ACP or 9mm Luger
  • Steel follower
  • Made in the USA

Cons:

  • Expensive

Why it’s recommended: If you’re willing to spend big bucks for a big-time magazine, it’s hard to argue with this one. You’ll never need another one, unless it’s an extra Vickers.

Armscore’s ACT Mag comes in a few different varieties, but they’re all built for .45 ACP cartridges. It’s available in three capacities: 7 rounds, 8 rounds and 13 rounds. The 13-round version is a double stack model, and won’t fit in a standard 1911. The 7 and 8 round versions will fit any standard government 1911. All sizes have a reasonably strong spring and a smooth-operating follower.

The tubes themselves are made from carbon steel. On the one hand, this lowers the price. On the other hand, carbon steel isn’t as strong as stainless, and is easier to bend if it’s dropped. This can lead to binding if you don’t notice it. The 8-round magazine is also available with a nickel tube. Inexplicably, this superior tube is actually less expensive. If you’re looking for a standard, 8-round magazine, the get the nickel one.

Pros:

  • Holds up to 13 rounds
  • Available in double stack model
  • Steel or nickel finish available
  • Inexpensive

Cons:

  • Carbon steel version can bind up

Why it’s recommended: This is a solid magazine for the price. If you’re looking for a double stack model, it’s one of the better ones out there.

The Wilson Combat 10-Round .45 ACP Magazine has the highest capacity available in a standard single-stack mag for 1911. The extra length is housed inside a polymer base pad. Not only does this keep it protected, it’s also easy to hold when you’re removing the magazine. The tube is stainless steel, and is available in both a silver finish and a black finish.

The spring is strong and durable, and pushes a self-lubricating nylon follower that’s both tough and smooth. Because of the slim base pad, this magazine can be a loose fit in flared mag wells, occasionally causing it not to seat properly. If this is a concealed carry pistol, that shouldn’t be a problem, since you’ll want to have a round chambered to begin with.

Like other Wilson Arms magazines, this one is on the pricier side. It’s worth every penny, though.

Pros:

  • Strong, durable springs
  • Self-lubricating nylon follower
  • Highest capacity available for standard 1911
  • Made in the USA

Cons:

  • A little expensive
  • Can fit loosely in flared mag wells

Why it’s recommended: Wilson Arms makes some of the best magazines in the business. If you’re looking for a high-capacity mag for your single stack 1911, this is a great choice.

 

The Gun Pro .45 ACP Anti Nose Dive Magazine has a unique design. It has a relatively weak spring, which makes it easier to load, while it uses a secondary spring to push the bullet up and forward, avoiding nose-dive jams that can happen with other soft-spring magazines.

It’s available in a 7-round magazine for the officer’s 1911, and 8 or 10-round sizes are available for the government model. The tube and follower are both machined from stainless steel, and have very tight tolerances. This mag fits nicely in any single stack 1911. The 8-round version has a nylon base pad, and the 10-round version has an extended base pad that shields the bottom portion of the magazine. The Gun Pro is made in the USA.

Pros:

  • Available in 7, 8 or 10-round sizes
  • Stainless steel tube and follower
  • Secondary spring for ideal feeding angle
  • Made in the USA

Cons:

  • Relatively loose spring

Why it’s recommended: This magazine is easy to load, but still feeds reliably. As long as you keep it clean and oiled, it’s a good choice.

The Trip Research magazine is modeled after the extremely high-end Les Baer 1911 magazine. It’s not quite as good, but honestly you don’t need an actual Les Baer magazine unless you’re competing at very high levels. The stainless steel tube and follower are durable, and the spring is strong enough to prevent jams. The follower can take more abuse than most, because it directly engages the slide catch with a steel surface, rather than with polymer or nylon.

This magazine is available for both officer’s and government models of the 1911. The 7-round officer’s version can come with or without a polymer base pad, while the 7-round government version only comes without one. The 8-round version of the government magazine has one, and it’s sized well for most flared mag wells. It’s more expensive than most magazines, but it’s reliable enough to trust your life to.

Pros:

  • Stainless steel tube and follower
  • Available in both officer’s and government sizes
  • 7 and 8-round capacity available
  • Follower engages slide to reduce wear

Cons:

  • More expensive than average

Why it’s recommended: This is a high-quality magazine at a high-quality price. For the officer’s model 1911, it’s the best on the market.

The Chip McCormick Shooting Star is available in two versions: one with a nylon base pad and one without. It doesn’t matter much either way, since the pad is removable and the welded base has pre-drilled holes even on the pad-less version. This is an inexpensive mag that gives you 8 rounds of capacity with a relatively low profile. If you carry concealed, it will cut a few fractions of an inch from the gun’s outline.

The Shooting Star achieves this by using a unique, flat follower that takes up less space than one with a standard shape. We haven’t had any trouble with this feature, but some users report that the follower catches on the slide unintentionally, and wears out within just a few uses. Your mileage may vary here, depending on the exact 1911 you’re using.

Pros:

  • Welded base with nylon pad
  • Affordable
  • Stainless steel tube
  • Low profile

Cons:

  • Can accidentally catch the slide
  • Pre-drilled holes in base

Why it’s recommended: This is a serviceable, inexpensive magazine that’s better than most stock 1911 mags.

The Kimber 10-Round Rimfire Magazine is designed to be used with the Kimber and Ciener .22 LR conversion kit. It can work with other kits, as well, but Kimber only guarantees it with their own. The base pad has a large flare which will fit snugly in even the widest mag wells, but may need to be modified to fit smaller ones.

Needless to say, you won’t be doing any personal or home defense with this magazine. The .22 LR conversion is used for competitive match shooting due to its low recoil when compared to a .45 ACP. The Kimber magazine is relatively inexpensive, and very durable. The polymer tube stands up well to frequent handling, and reduces the chance of bending critical parts before a match. The follower is nylon, but this is a plus with rimfire rounds, since it won’t accidentally crush the base of the cartridge.

Pros:

  • Black polymer tube
  • 10-round capacity
  • Perfect for match shooting
  • Inexpensive

Cons:

  • Only works with converted 1911s
  • May require some modification

Why it’s recommended: If you’ve modified your 1911 for match shooting, this magazine is a good choice. Make sure to save your receipt until your sure it works with your conversion kit.

The .38 super falls in between the .9mm and the .45 ACP in terms of force. It’s heavier than the .9mm, but lighter than the .45. The recoil also falls somewhere in between. As a result, people forget about it when they talk about self defense cartridges. The consensus seems to be that you use a .45 ACP if you can handle the recoil, and a 9mm if you can’t.

The .38 super fills a small but important niche, though: it’s a great pistol hunting cartridge. It has almost as much stopping power as a .45, but has far superior ballistic performance due to the higher velocity. Because of this performance, it’s also used for competitive shooting.

If you own a 1911 that’s chambered in .38 super, the Chip McCormick is a good magazine. It’s reliable enough for home defense use, and has a durable stainless steel tube with a polymer base pad.

Pros:

  • Good for pistol hunting
  • Reliable for self-defense
  • Stainless steel tube
  • Polymer base pad

Cons:

  • Pricier than most magazines

Why it’s recommended: If you shoot a .38 super, there aren’t a lot of magazines out there. This is the most reliable much.

The 10mm is another unusual cartridge, although it’s slowly grown in popularity since its introduction in 1983. The bullet is slimmer than a .45 ACP, but has a longer cartridge that holds a similar sized charge. As a result, you get very high muzzle velocity – over 1,200 FPS from a pistol! – with recoil that’s closer to a 9mm than a .45. This makes the 10mm excellent for home defense, target shooting, or even pistol hunting.

This magazine is manufactured by Colt, specifically for Colt 1911s chambered in 10mm. It’s a little pricey, but the stainless steel tube and follower are durable, and the spring is strong enough not to cause any jams. It doesn’t have a base pad, though. This makes it ideal for standard government 1911s, but not for models with a flared magazine well.

Pros:

  • Genuine Colt replacement
  • Stainless steel tube and follower
  • Designed for 10mm rounds
  • Strong spring

Cons:

  • On the expensive side
  • No base pad

Why it’s recommended: 10mm magazines are few and far between. This is one of the best, and it’s made by Colt.

Key Considerations When Choosing a 1911 Magazine

Your life may depend on your pistol. After all, that’s why you have it! You don’t want to find out you have a sub-par magazine at the wrong time. Before you buy, there are a few things you’ll need to know about 1911 magazines.

Types of Magazines

There are two main types of pistol magazine: single stack and double stack. Single stack magazines have the cartridges stacked directly on top of each other. This allows for better reliability, and a slimmer grip for easy concealment. They also weigh less, keeping the pistol more front heavy and reducing recoil. On the other hand, single stack magazines have a lower capacity.

Double stack magazines have the cartridges stacked in a staggered configuration. On the one hand, you can carry more ammo this way. On the other hand, the magazines and grips are thicker, and harder to conceal. They can also make the gun back heavy due to the increased weight. Because the cartridges have to slide diagonally against each-other to load, double stack magazines can sometimes bind up.

The original “officer’s” model pistol had a 7 round magazine, but was soon replaced by the “government” model, which holds an 8-round  magazine. Most modern 1911s are government model, although there are still officer’s model pistols in production. There are also extended magazines available. Most of these hold 10 rounds. Extended magazines increase the profile of the gun, and make it harder to conceal.

A few manufacturers have started making double stack 1911s. These companies include Armscor, Para Ordinance, Strayer Voight and STI. Double stack magazines have a capacity of 12 rounds, with extended versions available that will hold up to 14 rounds.

Cleaning Your Magazine

If you know anything about firearm maintenance, you probably clean and oil your pistol after every use. But your magazine also needs to be cleaned from time to time. It’s part of your gun, too!

As the chamber gets pushed open by the recoil, some exhaust escapes through the bottom of the chamber and into the magazine. This amount is insignificant to the amount that escapes through the barrel, but it’s enough to cause carbon buildup and fouling over time.

Not only that, but magazines are more likely to get dropped than a pistol. If they get dropped in dirt or sand, some is going to end up inside them. They can also collect pocket lint, and oil from your skin can cause dust to stick to them.

The easiest way to clean them is to scrub the follower with a toothbrush to scour off carbon buildup. After that, you’ll want to wipe it with a clean patch to remove any bits your toothbrush didn’t take off. If the floor plate is removable, you’ll want to take it off and clean inside. Wear eye protection when you do this. The spring can cause parts to fly out. Wipe down the inside of the body, clean and oil the spring, and clean the bottom of the magazine. Put it back together, and you’re good to go.

If your floor plate isn’t removable, buy a magazine cleaning brush. These are T-shaped, inexpensive, and can be found at most stores that sell pistols. Make sure to get the correct size. Using one that’s too small won’t get your magazine clean, and a large one can damage the spring.

How to Carry a Spare Magazine

There are a variety of ways to carry a spare magazine. When going into the range, always check your state laws first. Most states will require the pistol to be unloaded, and stored separately from any ammunition. If you’re shooting competitively, make sure to be careful with any bag the magazine is stored in. The last thing you want to do is drop it or bump into something and damage your mag.

Of course, if you have a concealed carry